Mosfet - VERSION 2 til Bag

Professionally made mosfet designed for airsoft electric guns (AEG).
Device increases gun rate of fire and battery holds longer, than with basic wiring.
It is fully integrated inside the gearbox version 2 instead of the original trigger contacts, compatible with Tokyo Marui standard.

 

SPECIFICATIONS:
- Mosfet build on trigger contacts from SHS company
- Easy installation inside the gearbox version 2
- Presoldered wires allows faster and easier installation into the gun, it is long enough for all kind of weapons. Simply cut wires to the required length and attach connectors (included in package)
- On the devices are presoldered high quality 2 black wires 1,5 qmm (AWG16) with with thin and hard MPPE insulation, length 300 mm to the motor and 700 mm to the battery. The blue wire 0.34 qmm (AWG24) with a length 1000 mm is used for connection anywhere on the red cable
- In package is included 1000 mm red wire 1,5qmm (AWG16) with with thin and hard MPPE insulation
- Wiring is designed to lead into the stock, but it can go to the front under condition to turn around black battery wire on the board (resolder it)
- Board covered by conformal coating, it protect device against water
- If you want to use your own wires, choose device without wiring
- Designed for spring up to M160 (equivalent for current 75A single shot fire or 25A burst fire for max. 30s). For higher load please use Mosfet II (it is outside gearbox)
- Specified for common batteries up to 17V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8V)
- No current consumption in the idle mode
- No sparking on switch contacts
- In auto fire mode piston stops in random position due the mechabox design
- For right function is necessary to have a functional gearbox cut off lever, selector plate, reverse latch, trigger and trigger block, as it has the standard gearbox

DEVICE INSTRUCTIONS: you can download installation manual in English here [PDF, 761.42 kB]
PACKING: 
- mosfet on trigger contacts with wiring
- trigger switch
- screw, pad (for screw to keep device in the position)
- DeanT connector male
- 30A mini fuse
- 4x faston female 2,8mm
- 6x black heat shrink tube 3,2mm - length 20mm
- 3x black heat shrink tube 4,8mm - length 20mm
- installation manual in English

 

WARNING: Installation of this device leave to expert, who could solder and disassemble airsoft gun. Never user soldering gun!
We can't guarantee 100% compatibility with all gearboxes, but Mosfet - V2 will fit into standard and common brand's gearboxes without larger modifications.

 

 

Hos Actionshoppen får du altid gratis fragt til pakkeshop, når du handler for over 500 kr. Vi tilbyder også altid gratis retur, hvis du skulle fortryde dit køb!

Hvis du kan finde et af vores produkter billigere et andet sted så Matcher vi prisen.

Følgende skal være opfyldt for at kun gøre brug af vores prismatch:

1. Det skal være præcis den samme vare.

2. varen skal være på lager i den pågældende butik.

3. Varen skal kunne købes lige nu og her i den pågældene butik.

4. Butikken skal være inden for Danmarks grænser.

5. Prisen må ikke være en fejl i den pågældende butik, eksempelvis. ophørsudsalg, rest parti eller et gammelt udgået tilbud eller en tastefejl eller lignende.

Sådan gør du brug af vores prismatch:

Du skal indsæt et link i Bemærkningsfeltet hvor du har fundet den vare billigere (dette skal gøres), så nedjusterer vi prisen på din ordre så prisen matcher den billigere pris og vi trækker kun det korrekte beløb. Vi hæver naturligvis først pengene når ordren er afsendt.

Du skal bruge prismatchen inden din ordre bliver afsendt. Ellers bortfalder den.