Mosfet - VERSION 2 til Bag

Professionally made mosfet designed for airsoft electric guns (AEG).
Device increases gun rate of fire and battery holds longer, than with basic wiring.
It is fully integrated inside the gearbox version 2 instead of the original trigger contacts, compatible with Tokyo Marui standard.
Drop-in wiring with be battery in stock with DeanT connector - no soldering needed.

 

 

SPECIFICATIONS:
- Mosfet build on trigger contacts from SHS company
- Easy installation inside the gearbox version 2
- Completely made wiring allows the fastest and the easiest installation into the gun, it is long enough for all kind of weapons with battery placed in the stock
- There are high quality power wires 1,5 qmm (AWG16) with MPPE insulation and signal blue wire 0.34 qmm (AWG22)
- The wire length between the gearbox and the battery connector is 290mm
- Board covered by conformal coating, it protect device against water
- If you want to use your own wires, choose device without wiring
- If you need another type of wiring, choose device with universal wiring
- Designed for spring up to M160 (equivalent for current 75A single shot fire or 25A burst fire for max. 30s). For higher load please use Mosfet II (it is outside gearbox)
- Specified for common batteries up to 17V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8V)
- No current consumption in the idle mode
- No sparking on switch contacts
- In auto fire mode piston stops in random position due the mechabox design
- For right function is necessary to have a functional gearbox cut off lever, selector plate, reverse latch, trigger and trigger block, as it has the standard gearbox

DEVICE INSTRUCTIONS: you can download installation manual in English here [PDF, 706.08 kB]
PACKING: 
- mosfet on trigger contacts with wiring, DeanT connector, 30A mini fuse and faston connectors on wires
- trigger switch
- screw, pad (for screw to keep device in the position)
- installation manual in English

 

 

WARNING: Installation of this device leave to expert, who could solder and disassemble airsoft gun. Never user soldering gun!
We can't guarantee 100% compatibility with all gearboxes, but Mosfet - V2 will fit into standard and common brand's gearboxes without larger modifications.

 

 

 

Hos Actionshoppen får du altid gratis fragt til pakkeshop, når du handler for over 500 kr. Vi tilbyder også altid gratis retur, hvis du skulle fortryde dit køb!

Hvis du kan finde et af vores produkter billigere et andet sted så Matcher vi prisen.

Følgende skal være opfyldt for at kun gøre brug af vores prismatch:

1. Det skal være præcis den samme vare.

2. varen skal være på lager i den pågældende butik.

3. Varen skal kunne købes lige nu og her i den pågældene butik.

4. Butikken skal være inden for Danmarks grænser.

5. Prisen må ikke være en fejl i den pågældende butik, eksempelvis. ophørsudsalg, rest parti eller et gammelt udgået tilbud eller en tastefejl eller lignende.

Sådan gør du brug af vores prismatch:

Du skal indsæt et link i Bemærkningsfeltet hvor du har fundet den vare billigere (dette skal gøres), så nedjusterer vi prisen på din ordre så prisen matcher den billigere pris og vi trækker kun det korrekte beløb. Vi hæver naturligvis først pengene når ordren er afsendt.

Du skal bruge prismatchen inden din ordre bliver afsendt. Ellers bortfalder den.